Watchmaking The course

Watchmaking course from home

Learn the basics of watchmaking from your living room.

Online course & kits

A real movement, on your own table.

It's what I do with my students in the workshop: take a calibre apart, clean every part, put it back together and oil it. I filmed it at the bench so you can do it at home, at whatever pace suits you. If you don't have tools, you can buy the kit that suits your project, and it's yours to keep.

I started watchmaking about fifteen years ago, and back then there was very little to learn on your own, at home. If I make this course today, it's because it's what I wish I'd had when I started.

Online · at your own pace

Online course — 6497 calibre

The 6497 is a hand-wound calibre, big enough to see what you're doing. It's the one I give every beginner.

€149

or 3 × €49.67 interest-free with Klarna

  • 5 chapters filmed at the bench, 1 h 54 of video
  • The step-by-step guide, to keep beside the movement
  • Your questions, asked at the exact second of the video — I answer them myself
  • The 6497 in 3D and the watchmaking calculations lesson, in motion
  • Access with no end date, on your computer and your tablet
  • Your certificate at the end, to add to LinkedIn
  • One hour of video lesson with me, included
  • A part lost or broken during the course: I send you the first one, free

By Tristan Ledard, qualified watchmaker, Young Talent prize of the AHCI and François-Paul Journe

Not sure yet? Watch the first ten minutes of the disassembly first, free →

Watch the course
  1. i.

    Order

    The course and, if you like, a tool kit and a 6497 movement.

  2. ii.

    Receive

    Your access arrives by e-mail, your tools by post.

  3. iii.

    Learn

    Watch the videos and follow the guide whenever you like, as many times as you need.

How the course works

You learn at home, at your own pace, but you are not on your own: I'm there all the way through.

A question, the moment it comes up While you watch a video, a button lets you ask me your question at that exact point. It reaches me with the chapter and the second of the video, and I answer it myself, in your space and by e-mail.
And about something other than the video Working on another watch, another movement? The “My bench” tab of your space lets you ask me at any time, with a photo of what's in front of you.
One hour by video, included One hour of live lesson with me is included in the course. You pick the time from your space; we share the screen and I film the movement on my bench.
Understanding what you take apart The calculation part of the course explains the gear train, the escapement and the barrel on the 6497 in 3D. It goes well with the hands-on work, especially if you're aiming for watchmaking training afterwards.

Your student area

This is what you find when you sign in with your code: the whole course in one place, on a computer or a tablet.

The chapters and the video: you pick up where you left off.
A question at the exact moment of the video. It reaches me with the second, and the answer stays under the chapter.
Your hour by video: you pick the slot, I confirm.
Practise between chapters: the movement in 3D, the calculations, regulating, water resistance, quartz.
A timegrapher like the one in the workshop, and the balance: turn the stud carrier and the regulator, see what changes.
The documents: the glossary, the step-by-step service, the files.

For students

The course movement, in 3D.

In your student area this 6497 is yours to handle: turn it all the way round, above and below, lift the layers off one by one and tap a part to see its name. This is what it looks like.

In the student area

Understanding how it works, on the real movement.

The lesson on watch calculations sits beside the course's 6497, in 3D and running: the train and its ratios, the escapement slowed down step by step, the mainspring being wound and letting down, the crown pushed in to wind and pulled out to set the time. Tap any part for its name.

In the student area

Regulate a watch, try it now.

In the course, a timegrapher like the one in my workshop, wired to the 6497's balance. Turn the stud carrier: the beat error changes. Turn the regulator: the rate changes. What follows is the real lesson, live.

RATE s/dayBEAT ERROR (count down s)AMPLITUDE deg
----------
AUT288002 522GRAPH
BEAT MODEBEATS PER HOURMEAS. TIMELIFT ANGLEGRAPH RESOL.TEST MODE

timegrapher · l'atelier TL

sig level
freeze print cursor speaker

Your turn: regulate it

Turn the stud carrier or the regulator with a finger, right on the balance, or with the sliders. The rate and the beat error change on the machine, just like on the one in the workshop. The stud carrier takes the regulator with it.

And on your own watch, in the student area: the timegrapher and its microphone →

The TL Micro + the course

A timegrapher in your browser.
I don't know of another.

The TL Micro is the microphone I use in the workshop (€50). Plug it into your computer or phone and put the watch on it: the timegrapher I wrote for the site opens in your student area and listens, like the instrument on my bench.

  • Nothing to install, no instrument to buy: it runs in the browser.
  • The rate, the beat error and the amplitude, with the lift angle of more than 3,800 calibres.
  • Guided from one position to the next, your measurements kept in your space.
  • The regulating chapter shows you what to adjust: the stud carrier, then the regulator.
The TL Micro for real: plug it in, put the watch on, read the rate, the beat error and the amplitude.

The course and the microphone together: €199. About the price of an entry-level timegrapher, with the course on top.

The course and the TL Micro

Water resistance, tested as in the workshop.

The course's test bench: the case cut in half in the chamber, the crystal and caseback giving way, the air getting in where it leaks, and the curve I read on my machine. A sound case, a crystal pressed in too loose, a worn crown seal.

Watchmaking tool kits

I put the kits together myself. I chose each tool for the best balance of quality and price: they are not the most high-end tools, but they are made to last. The kit's screwdrivers, for example, are the ones I use every day at work.

Essential movement kit

€99

or 3 × €33 interest-free with Klarna

In stock
  • Loupe set
  • Dust cover
  • Fine and thick tweezers (×2)
  • Screwdrivers
  • Presto hand remover
Buy online

Classic kit

€189

or 3 × €63 interest-free with Klarna

In stock
  • Screwdrivers
  • Dust cover
  • Dust blower
  • Friction ball
  • Movement holder
  • Casing cushion
  • Loupe set
  • Oilers
  • Dial protector
  • Finger cots
  • Fine and thick tweezers (×2)
  • Presto hand remover
  • Hand setter
Buy online

Oiling & cleaning kit

€279

or 3 × €93 interest-free with Klarna

In stock
  • Screwdrivers
  • Oil
  • Dust cover
  • Dust blower
  • Friction ball
  • Movement holder
  • Casing cushion
  • Loupe set
  • Oilers
  • Dial protector
  • Finger cots
  • Fine and thick tweezers (×2)
  • Presto hand remover
  • Hand setter
  • Cleaning jar
  • Rodico
Buy online

The tools one by one

Every tool in the kits can also be bought on its own: to complete a kit, or to replace a tool.

Buy the tools one by one
Compare the kits
ToolEssential movement kit€99Classic kit€189Oiling & cleaning kit€279
Loupe set✓✓✓
Dust cover✓✓✓
Fine and thick tweezers (×2)✓✓✓
Screwdrivers✓✓✓
Presto hand remover✓✓✓
Dust blower—✓✓
Friction ball—✓✓
Movement holder—✓✓
Casing cushion—✓✓
Oilers—✓✓
Dial protector—✓✓
Finger cots—✓✓
Hand setter—✓✓
Oil——✓
Cleaning jar——✓
Rodico——✓
ChooseChooseChoose

The next courses

Filmed at the bench like the first, with the same questions, the same space and the same certificate.

Coming soon

ETA 2824-2 — automatic winding, the date, regulating and testing

€119

Tell me when

Movements, watches & accessories

The 6497 watch, black dial.
The 6497 watch, black dial.
The 6497 watch, blue dial.
The 6497 watch, blue dial.
The movement, seen through the back.
The movement, seen through the back.
The case it is sent to you in.
The case it is sent to you in.

4 photos: click to see them

6497 watch

€199

In stock

A mechanical pilot's watch, hand-wound, with the same 6497 movement as the course.

  • Blue dial or black dial
  • Display back: you see the movement
  • Brown leather strap
  • Delivered in its case
The dial
Buy online
The 6497 movement, here in the watch, seen through the back.
The 6497 movement, here in the watch, seen through the back.

6497 movement

€99

In stock

The mechanical movement you take apart and rebuild in the course: to practise, or to have a second one.

  • Calibre 6497, hand-wound
  • The course's own, part for part
Buy online

Order it all at once

The course, a kit, the movement: tick what you want, the total adds up.

A tool kit

To go further

Total€149

Secure payment by Stripe: card, iDEAL, Bancontact, Apple Pay — or in 3 interest-free instalments with Klarna.

A part lost or broken during the course? I send you the first one, free.

Courses at my workshop

From December, I welcome you at my workshop in Twente. You work at the bench, with my tools, on a movement I provide. Only a few places per date, so I can be beside you the whole time.

🗣 Courses at the workshop are taught in English or French. Only the online course is also available in German, and with Dutch subtitles.

1 day

A day on the 6497

€289 per person

or 3 × €96.33 interest-free with Klarna

🗣 In English or French

  • The ETA 6497 hand-wound calibre, the one in the online course
  • Full disassembly, cleaning, reassembly and oiling
  • Regulating on the timegrapher: rate and beat error
  • Tools and movement provided

Dates are coming: tell me which ones suit you.

Ask for a date
🎁 Give it as a gift voucher
1 day

A day on the 2824

€329 per person

or 3 × €109.67 interest-free with Klarna

🗣 In English or French

  • The ETA 2824-2 automatic calibre
  • The automatic module, the date and the hand setting
  • Disassembly, cleaning, reassembly and oiling
  • Regulating on the timegrapher
  • Tools and movement provided

Dates are coming: tell me which ones suit you.

Ask for a date
🎁 Give it as a gift voucher
2 days

Two days: your own 6497 watch

€999 per person

or 3 × €333 interest-free with Klarna

🗣 In English or French

  • The 6497 taken apart, cleaned, reassembled and regulated
  • You make parts: screws, a wheel
  • You modify the bridges and the dial
  • Casing up: dial, hands, case and strap
  • You leave with the watch you made

Dates are coming: tell me which ones suit you.

Ask for a date
🎁 Give it as a gift voucher
A dial being openworked on the milling machine, on its brass plate.
A dial being openworked on the milling machine, on its brass plate.
The same work at the start: the first holes in the dial.
The same work at the start: the first holes in the dial.
Dial side: the openwork shows the movement.
Dial side: the openwork shows the movement.
The movement beside its case, before casing up.
The movement beside its case, before casing up.
The same watch from both sides: the dial, and the movement at the back.
The same watch from both sides: the dial, and the movement at the back.
At the back, the reworked 6497 bridges.
At the back, the reworked 6497 bridges.
A finished watch.
A finished watch.
On the bench, hands fitted.
On the bench, hands fitted.

Tailor-made courses

A course built around what you want to learn

Servicing your own watch, understanding an automatic calibre, learning regulation or skeletonising: tell me what interests you. Beyond the workshop courses above, I build the course around your project and your level.

  • At my workshop In the Netherlands, with all the bench tooling.
  • At your home, on your own If you are on my way between the Netherlands and France — from Lille to Méru, then from Méru to Caen — within a 50 km detour, I stop at your place.
  • As a group, in France and Belgium At your company, your club or your shop: I come with the tools and the movements, for several people at once.
  1. You describe your project and your level
  2. I suggest a programme and a price
  3. We set the date together

Ask for a tailor-made course

6497 mechanical movement in a holder

Give the online course

The online course or a day at the workshop: a voucher in their name, valid for a year, ready to print as soon as you pay.

Make the voucher

Not sure yet?

The first ten minutes of the disassembly.

Leave your e-mail: I'll send you the start of the chapter on taking the movement apart, just as my students see it, to watch for seven days.

Here is everything you're going to take apart, and put back together, part by part.

In video

The bench, the gestures and the movements, filmed in the workshop.

Videos only load when you click, so there's no YouTube cookie before that.

The questions people ask me

Do I need to know anything about watchmaking already?

No. We start with how to hold the tools and how to sit, and go all the way to rebuilding a movement. I use the 6497 because it's large, easy to read, and sturdy enough for a first strip-down.

What exactly do I receive?

Access to the student area with the videos chapter by chapter and the guide, one hour of video lesson with me, included, and, depending on the formula you choose, the 6497 movement and the tool kit sent to your home. The tools are yours to keep.

How long do I have access to the course?

Access does not expire. Your code opens the course on a few devices, your computer and your tablet for instance. If you change machine, write to me and I'll free the slot.

Can I ask questions along the way?

Yes. In the student area you ask your question at the exact point in the video. It reaches me with the chapter and the second, and I answer it myself.

Can I take a course with you in person?

Yes. At my workshop in the Netherlands; at your home if you are on my way between Lille, Méru and Caen, within a 50 km detour; or as a group at your company or club, in France and Belgium. Write to me with your project and I will suggest a programme and a price.

What if I lose or break a part?

It happens, especially the first time: a screw that jumps, a spring that flies off. I send you the first replacement part, free.

Do I need a workshop or expensive tools?

A table, good light and a little space are enough. The kit holds what the course needs; nothing else is required to finish it.

Where do you ship, and how fast?

To all 27 countries of the European Union, and also to Switzerland, the United Kingdom, Norway, Iceland, Liechtenstein, Monaco, Andorra, San Marino, Gibraltar, Serbia, Bosnia and Herzegovina, Montenegro, North Macedonia, Albania, Moldova and Canada (Québec included). As a tracked and insured parcel from the Netherlands, with the invoice; the tracking number is sent to you the day it leaves. Allow 2 to 4 working days for most countries, up to a week for the farthest (Greece, Cyprus, Malta, the Baltic states, the Balkans), one to two weeks for Canada. The shipping for your country shows in the basket. Outside the European Union, any import taxes are paid on delivery.

How can I pay?

By card or iDEAL on a secure page, at once or in 3 interest-free instalments with Klarna (from 35 €), or by bank transfer: the IBAN and the reference are on the invoice, with a code to scan from your banking app.

And if the course is not for me?

Write to me. The terms of sale set out the right of withdrawal and what happens to a kit already opened; in practice, it always starts with a message.

Are the lessons pre-recorded, or at fixed times?

Pre-recorded. You follow the course whenever you like, at your own pace, even with irregular working hours. If you have a question during a video, you ask it right there and I answer you directly; the answer appears in your space. Only the free hour by video with me is live, at a time you choose.

I live in Québec or elsewhere in Canada: is that possible?

Yes. The course is online and filmed in French; you follow it from wherever you are. The kit and the movement leave the Netherlands as a tracked parcel, with Canadian shipping; any Canadian taxes are paid on delivery. For the hour by video, my slots are shown in Paris time, six hours ahead of Montréal: my evenings are your afternoons.

Can I clean a movement without a cleaning machine?

Yes. A glass jar, the cleaning fluid and a brush: the bridges and the plate are cleaned with the brush, for about ten minutes; the balance and its cock simply soak, without being rubbed. Dry with the blower so the fluid evaporates without leaving a film, then check under the loupe, above all the jewel holes. With an ultrasonic bath it is ten minutes in the bath, then the brush.

Which oils do I need, and how much?

Four: 9010, 9415, HP1300 and 8200. The HP1300 replaces the D5. Buy the smallest amount, 2 ml of each: that is already enough for a good number of services. The oiling and cleaning kit holds the oil for the course.

Two ways to pay

By card, iDEAL or in 3 instalments

Secure payment by Stripe, at once or in 3 interest-free instalments with Klarna. Your access is sent as soon as it is confirmed.

Buy online

By transfer or iDEAL

Write to us: you receive an invoice with the IBAN and a reference. Access follows the payment.
Put your name and what you are buying in the description of the transfer: that is what lets the workshop recognise your payment and send your access.

Pay by bank transfer

Contact

Write to me.